This is section C. under the OSHA directive PRO 4.3 OSHA Instruction October 30, 1978, the section concerning safety glasses only.  To visit the OSHA website click the link to the right. ----->

All SoCal Products Safety glasses adheres to OSHA requirements as stated below. 

C>  Standards. Occupational and Educational Eye Protection ANSI-Z87.1 requirements must be met:

(1) Safety spectacles require special frames. Safety lenses meeting this standard in combination with street-wear frames are not acceptable. Frames must bear the manufacturer's identification trademark on both fronts and temple. See ANSI-Z87.1 for detailed requirements.

(2) Lenses must be 3 millimeters thick and distinctly etched with the manufacturer's monogram. The marking must be placed so as not to interfere with the wearer's vision.

(3) Tinting, if required, should be in accordance with ANSI-Z87.1 requirements and be a shade appropriate to the "eye hazardous" areas to be entered. Each lens must be marked with the shade designation.

(4) Glass lenses must be marked with the letter "H" to indicate treatment for impact resistance.

OSHA Instruction October 30, 1978 PRO 4.3